Automatic 3ply Disposable Surgical Mask Making Machine Manufacturer,Mask Production Line
This machine is suitable for the production of mask products.
Project Description:
Project name: Automatic mask online combination machine
Product: Face mask with ear band
Production capacity: 100 PCS/Min
Machine size: length 6800 mm X width 3800 mm X height 2000 mm
Operating environment requirements: temperature 10-40℃
Distribution requirements: three phase, five-wire system, voltage 380V, 50Hz
Remark: The scheme for the universal standard structure, that is, the mould and cutting size according
to the standard.The customer needs to communicate and confirm the special size before signing the
contract.
The installation of the equipment in this scheme shall refer to the instructions of the supplier and ensure
that there is 1 meter clearance around the machine for maintenance operation.
Material Specification:
| Material name |
specification |
note |
width
(mm) |
Gram weight
(g/m2) |
Cutting size
(mm) |
Expendable weight
(g) |
| Non-woven fabric dark color (outer layer) |
200 |
25 |
175 |
0.875 |
commonly is blue |
| White melt-blown non-woven fabric (filter layer) |
180 |
22.5 |
175 |
0.70875 |
Depends on customer |
| Light or white non-woven fabric(inner layer) |
210 |
25 |
175 |
0.91875 |
Grams are optional |
| Ear ribbon |
|
|
150 * 2=300 |
|
2 elastic cord |
| nose bridge |
|
|
|
|
optional(Aluminum or iron wire) |
Machine Specification And Installation Requirements:
1. Configuration power: AC220V ± 5%, 50Hz, the maximum starting power of the equipment is 10KW.
2. Compressed air: 0.4MPa ~ 0.6Pa, air pressure fluctuation ± 1% (clean water after dewatering, no oil,
filtering, voltage stabilization), compressed air consumption: 300L / min.
3. Equipment specifications:
1) Equipment weight: about 1000Kg
2) Appearance color: Aluminum alloy processed parts adopt natural color anodizing; all stainless steel
appearance parts are made of matte stainless steel; all parts of the whole machine that have relative
movement must not have metal For collision or friction, the cylinder can not help but copper, and all
other leaking parts and interface parts are forbidden copper; the paint is smooth, standard color number
is PANTONE, electric box international standard warm gray 1C or customer provided color card.
4. Environmental requirements:
1) Ground wire: protective ground.
2) Ground requirements: The load requirements > 500kg per square.
3) orkshop requirements: dust-free constant temperature workshop.
Equipment main component brand and spare parts:
1. Cylinder: Yadeke
2. Rail screw: Taiwan HIWIN, TBI
3. Solenoid valve: Yadeke
4. Servo motor: Mitsubishi or Huichuan
5. Programmable controller PLC: Mitsubishi or Xinjie
6. Touch screen: Taiwan Weilun
7. Inverter: Watson, Delta or Mitsubishi
8. Ultrasonic: 20KHz (intermittent wave / continuous wave)
9. All photoelectric sensors: OMRON or equivalent brand
10. Surface treatment of all steel parts: mainframe is made of aluminum alloy, parts are oxidized
11. Body: warm gray 1C (or sprayed according to customer's specified color)
12. Material of mechanical parts: steel plate and aluminum plate, aluminum profile, etc.
13. Equipment safety door cover: A3, T = 1.5
