In September 2016, we produced ZG60Cr5Mo wear plates.
1.We adopted the sand cast process to make the plates.The size is 690 x 600 x 20mm.The weight of each plate is about 60kg.
2.The material of the liners is ZG60Cr5Mo.The hardness required is more than HRC48.The actual hardness is about HRC53.
3.We cast the holes precisely to ensure the assembly gap 5mm for the wear-resistant liner castings.
Eternal Bliss Alloy Casting & Forging Co, Ltd.
Technical Dept.
2016.9